You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your phone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve created this article content to help you, because right now you’re going to find out how to install a car radio on your Buick LaCrosse. To make this happen, initially we will find out how to remove the old car radio, then how to install a car radio on Buick LaCrosse and finally, how to connect it.
How to install car radio on Buick LaCrosse: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Buick LaCrosse, there is one fundamental step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two options based on the stereo that equips your Buick LaCrosse:
- Original car radio:
In this case, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Buick LaCrosse. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Buick LaCrosse: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Buick LaCrosse. Ahead of time, take the time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Buick LaCrosse, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Buick LaCrosse, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Buick LaCrosse, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you need more guides on the Buick LaCrosse, go to our Buick LaCrosse category.
