You’re tired of listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve written this article content to help you, because right now you’re going to learn about how to install a car radio on your Lancia Ypsilon. To do this, first of all we will see how to remove the old car radio, then how to install a car radio on Lancia Ypsilon and at last, how to connect it.
How to install car radio on Lancia Ypsilon: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Lancia Ypsilon, there is one important step, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options dependant upon the stereo that equips your Lancia Ypsilon:
- Original car radio:
In this case, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Lancia Ypsilon. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Lancia Ypsilon: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Lancia Ypsilon. Ahead of time, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Lancia Ypsilon, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Lancia Ypsilon, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Lancia Ypsilon, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
In the event that you have any additional questions about the Lancia Ypsilon, do not hesitate to consult our Lancia Ypsilon category.
