You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smartphone is full of your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve made this article content to help you, because right now you’re going to find out how to install a car radio on your hyundai i30. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on hyundai i30 and finally, how to connect it.

install-car-radio-hyundai-i30

How to install car radio on hyundai i30: Removing the old car stereo

Before we begin the serious business of how to install a car stereo on your hyundai i30, there is one fundamental task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options determined by the stereo that equips your hyundai i30:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your hyundai i30. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections.
  • Aftermarket radio :
    In this situation the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your hyundai i30: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your hyundai i30. Beforehand, take some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your hyundai i30, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your hyundai i30, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on hyundai i30, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To find more tips on the hyundai i30, take a look at the hyundai i30 category.