You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your smart phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve made this content to help you, because right now you’re going to find out how to install a car radio on your Lexus IS. To achieve this, first of all we will discover how to remove the old car radio, then how to install a car radio on Lexus IS and finally, how to connect it.
How to install car radio on Lexus IS: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Lexus IS, there is one important step, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods according to the stereo that equips your Lexus IS:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Lexus IS. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Lexus IS: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Lexus IS. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Lexus IS, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Lexus IS, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Lexus IS, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any further questions about the Lexus IS, do not hesitate to consult our Lexus IS category.
