You’re tired of listening to cassettes and only having the ability to listent to the radio, while your smartphone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve created this content page to help you, because right now you’re going to learn about how to install a car radio on your Jeep Grand Cherokee. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Jeep Grand Cherokee and to finish, how to connect it.
How to install car radio on Jeep Grand Cherokee: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Jeep Grand Cherokee, there is one fundamental step, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions depending on the stereo that equips your Jeep Grand Cherokee:
- Original car radio:
In cases like this, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Jeep Grand Cherokee. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Jeep Grand Cherokee: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Jeep Grand Cherokee. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Jeep Grand Cherokee, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Jeep Grand Cherokee, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Jeep Grand Cherokee, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the Jeep Grand Cherokee, take a look at the Jeep Grand Cherokee category.
