You’re bored with listening to cassettes and only having the capability to listent to the radio, while your phone is full of your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve created this content to help you, because right now you’re going to learn about how to install a car radio on your Toyota Sienna. To achieve this, first we will see how to remove the old car radio, then how to install a car radio on Toyota Sienna and to finish, how to connect it.


How to install car radio on Toyota Sienna: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Toyota Sienna, there is one essential step, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions dependent on the stereo that equips your Toyota Sienna:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Toyota Sienna. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this circumstance the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Toyota Sienna: Fitting and connecting the car radio

Let’s go to the essential step for you, how to install a car stereo on your Toyota Sienna. Before you start, take some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Toyota Sienna, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Sienna, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Sienna, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

To find more tips on the Toyota Sienna, take a look at the Toyota Sienna category.