You’re bored with listening to cassettes and only having the ability to listent to the radio, while your phone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written this content to help you, because now you’re going to learn about how to install a car radio on your Ford Explorer. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Ford Explorer and finally, how to connect it.


How to install car radio on Ford Explorer: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Ford Explorer, there is one essential step, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options depending on the stereo that equips your Ford Explorer:

  • Original car radio:
    In this instance, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Ford Explorer. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Ford Explorer: Fitting and connecting the car radio

Let’s go to the most important step for you, how to install a car stereo on your Ford Explorer. Beforehand, take some time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Ford Explorer, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Explorer, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Explorer, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

If perhaps you have any further questions about the Ford Explorer, do not hesitate to consult our Ford Explorer category.