You’re sick and tired of listening to cassettes and only having the ability to listent to the radio, while your smart phone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve written this content to help you, because right now you’re going to learn about how to install a car radio on your Ford Crown Victoria. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Ford Crown Victoria and at last, how to connect it.
How to install car radio on Ford Crown Victoria: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Ford Crown Victoria, there is one necessary step, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options determined by the stereo that equips your Ford Crown Victoria:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Ford Crown Victoria. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Crown Victoria: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Ford Crown Victoria. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Ford Crown Victoria, once situated, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Crown Victoria, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Crown Victoria, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you need more guides on the Ford Crown Victoria, go to our Ford Crown Victoria category.
