You’re sick and tired of listening to cassettes and only having the capacity to enjoy the radio, while your phone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written and published this content page to help you, because right now you’re going to learn about how to install a car radio on your Ford Flex. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on Ford Flex and to finish, how to connect it.
How to install car radio on Ford Flex: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Ford Flex, there is one fundamental task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two ways dependant upon the stereo that equips your Ford Flex:
- Original car radio:
In cases like this, you’ll have to be patient, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Ford Flex. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Flex: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Ford Flex. Before you start, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Ford Flex, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Flex, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Ford Flex, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any further questions about the Ford Flex, do not hesitate to consult our Ford Flex category.
