You’re sick and tired of listening to cassettes and only having the ability to enjoy the radio, while your phone is loaded with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve posted this article content to help you, because in this article you’re going to find out how to install a car radio on your Dacia Sandero. To get this done, first of all we will find out how to remove the old car radio, then how to install a car radio on Dacia Sandero and at last, how to connect it.
How to install car radio on Dacia Sandero: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Dacia Sandero, there is one important task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two methods determined by the stereo that equips your Dacia Sandero:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Dacia Sandero. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Dacia Sandero: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Dacia Sandero. Beforehand, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Dacia Sandero, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Dacia Sandero, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Dacia Sandero, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more tutorials on the Dacia Sandero, go to our Dacia Sandero category.
