You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your smartphone is full of your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written and published this article content to help you, because right now you’re going to learn about how to install a car radio on your Fiat Stilo. To do this, initially we will discover how to remove the old car radio, then how to install a car radio on Fiat Stilo and at last, how to connect it.
How to install car radio on Fiat Stilo: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Fiat Stilo, there is one necessary step, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions based on the stereo that equips your Fiat Stilo:
- Original car radio:
In this case, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Fiat Stilo. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Fiat Stilo: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Fiat Stilo. Ahead of time, take the time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Fiat Stilo, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Fiat Stilo, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Fiat Stilo, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If perhaps you have any additional questions about the Fiat Stilo, do not hesitate to consult our Fiat Stilo category.
