You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is filled with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written this content page to help you, because in this article you’re going to find out how to install a car radio on your Audi Sq7. To get this done, initially we will discover how to remove the old car radio, then how to install a car radio on Audi Sq7 and finally, how to connect it.
How to install car radio on Audi Sq7: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Audi Sq7, there is one necessary step, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two ways depending on the stereo that equips your Audi Sq7:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Audi Sq7. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Sq7: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Audi Sq7. Beforehand, take the time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Audi Sq7, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Sq7, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi Sq7, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you want more guides on the Audi Sq7, go to our Audi Sq7 category.
