You’re tired of listening to cassettes and only being able to enjoy the radio, while your phone is loaded with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve written and published this content page to help you, because in this article you’re going to find out how to install a car radio on your Audi Rs5. To make this happen, first of all we will discover how to remove the old car radio, then how to install a car radio on Audi Rs5 and to finish, how to connect it.
How to install car radio on Audi Rs5: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Audi Rs5, there is one necessary step, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques determined by the stereo that equips your Audi Rs5:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Audi Rs5. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
- Aftermarket radio :
In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Rs5: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Audi Rs5. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Audi Rs5, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Rs5, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi Rs5, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the Audi Rs5, take a look at the Audi Rs5 category.