If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to take responsibility – your headlights, also often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Audi Rs5? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Rs5.
Why adjust the headlights of your Audi Rs5?
So let’s begin our content page with the benefit of adjusting the headlights of your Audi Rs5. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough through the night. However this is not constantly the circumstance and checking this setting, either because the headlights on your Audi Rs5 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Audi Rs5 for safety
First of all, the headlight adjustment of a Audi Rs5 must be carried out for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Audi Rs5 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi Rs5 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Rs5?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Audi Rs5? This adjustment may seem a bit complex, but by simply following the instructions you should be able to perform it without too much concern.
Preparations to adjust the headlights of a Audi Rs5
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Rs5
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Audi Rs5 (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Audi Rs5 is logical, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Audi Rs5, please read our content page on this subject matter.
Whenever you have any additional questions about the Audi Rs5, do not hesitate to consult our Audi Rs5 category.
