You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smartphone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve written this article content to help you, because now you’re going to learn about how to install a car radio on your Audi A8. To do this, first of all we will find out how to remove the old car radio, then how to install a car radio on Audi A8 and at last, how to connect it.
How to install car radio on Audi A8: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Audi A8, there is one important task, take out the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions based on the stereo that equips your Audi A8:
- Original car radio:
In cases like this, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Audi A8. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi A8: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Audi A8. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Audi A8, once situated, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi A8, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi A8, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
Whenever you have any additional questions about the Audi A8, do not hesitate to consult our Audi A8 category.
