Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case effective is necessary. In fact, bulbs are wearing units that will undoubtedly burn out after some time and as a result need to be replaced. You’re almost certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Audi A8’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Audi A8.

change-license-plate-bulb-audi-a8

How to change the license plate bulb on your Audi A8 through the outside

This tactic is the quickest of the two, in reality, for this one you will only need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this article content to demonstrate the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Audi A8. Whether it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple guidelines to stick to to perform this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi A8
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event you are afraid of destroying anything, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the process.

How to replace the number plate bulb on your Audi A8 without outside access

Second section of our item, change this license plate bulb on your Audi A8 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Audi A8

To change the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Audi A8

Finally last possibility, you must change the bulb on the backplate of your Audi A8, but you cannot open the cover from the outside of your automobile. In this instance, here is the tactic to perform this operation:

  • Unplug the battery from your Audi A8
  • Locate the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Audi A8, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main techniques for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Audi A8. If you want to change other bulbs like the position light bulbs on your Audi A8 or the low beam bulbs on Audi A8, don’t hesitate to read our articles which explain you the operation to follow.

Whenever you have any further questions about the Audi A8, do not hesitate to consult our Audi A8 category.