The battery of your vehicle is a wearing part, it is commonly considered that it will have between 5 and 6 years of life. You may have found yourself one day without a battery and not having the ability to turn on your Peugeot e-2008. And generally this is brought on by a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Peugeot e-2008? Precisely, our team has made this article to be able to help you do this simple procedure safely and securely. Initially, we will give you some recommendations on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Peugeot e-2008.

disconnect-battery-peugeot-e-2008

How to disconnect the battery on my Peugeot e-2008: A few tips

Firstly, before tackling how to disconnect the battery from your Peugeot e-2008, we will give you a few suggestions on how to do this process securely and save you from wasting time, some of them will undoubtedly seem evident to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Peugeot e-2008.
  • The battery in your car is an energy accumulator, and can possibly send out a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make sure you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
  • To finish when you go to the step how to disconnect the battery on your Peugeot e-2008, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Peugeot e-2008: Take action

Let’s commence now, the section that undoubtedly brings you on this page, how to disconnect a battery on your Peugeot e-2008. So, after having taken all the measures we mentioned just before, you will finally be able to attack the removal of the battery from your car. To do this, it will be very simple. First you will have to take off the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is completed, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Peugeot e-2008. Once both terminals are disconnected, you can start the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, usually held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just discovered the method for how to disconnect a battery on your Peugeot e-2008, if you stick to all the safety recommendations, everything should go well. If you want to learn how to safely reconnect your battery, check out this article, and if you want more information about your Peugeot e-2008, we have a directory of articles dedicated to your car.

To get more tips on the Peugeot e-2008, take a look at the Peugeot e-2008 category.