It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always working is very important. In reality, bulbs are wearing parts that will surely burn out with time and therefore need to be changed. You’re most likely here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Peugeot e-2008 parking light, we’ve created this article content to help you do this action on your own and not need to go to your auto mechanic. In a first step, we will take a look at changing the front daytime running light bulb of your car and in a second step, how to change the rear daytime running light.
How to change the front parking light bulb of my Peugeot e-2008?
We will commence this article with changing the front daytime running light bulb of your Peugeot e-2008, bear in mind that according to the year and finish of your car it may not be quite the same technique to use. In reality, regardless if the position of your bulb is not going to change, the access may be more or less difficult based on the features of your car.
First technique, we will accomplish the bulb swap of your daytime running light without removing the headlight of your Peugeot e-2008. Although this technique is the easiest, it is not assured that you will be in a position to accomplish it on your vehicle without trouble. In reality, depending on the versions and the year, on some versions there will not be enough space for you to change the bulb by doing this. Here are the two different solutions to change the bulb of the front parking light of your Peugeot e-2008:.
- Going through the bonnet of your car: First solution, you will only go through the bonnet of your vehicle to access your headlight unit. This is the most logical solution but it is not always easy to do to achieve, often because of secondary auto parts that will obstruct your access. To get this done, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been accomplished, you will need to access the back of your headlight unit to change the daytime running light bulb on your Peugeot e-2008. You might need to take out the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its location. To get this done, pull delicately on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can change your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the system, reconnect your battery and do a check test before taking to the road.
- By removing the crosshair grill and the headlight:
- Second solution, you can remove the headlight of your Peugeot e-2008 if it turns out the access through the engine block seems too obstructed. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these steps are finished you will just have to stick to the same methodology as on the previous section to change the front daytime running light bulb of your Peugeot e-2008
.
How to change the rear parking light bulb on your Peugeot e-2008
To finish , if you wish to change the rear parking light bulb of your Peugeot e-2008 the approach is less difficult, here are the different basic steps to stick to to allow you to change this bulb:
- Unplug your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Insert your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Peugeot e-2008, please browse our specific document to discover how to do it.
If you want more guides on the Peugeot e-2008, go to our Peugeot e-2008 category.
