The battery of your car is a wearing component, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one day without a battery and not being able to turn on your Cadillac ATS. And quite often this is the result of a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Cadillac ATS? Precisely, our team has posted this article content to be able to help you accomplish this simple task safely. Initially, we will give you some recommendations on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Cadillac ATS.
How to disconnect the battery on my Cadillac ATS: A few tips
Firstly, before dealing with how to disconnect the battery from your Cadillac ATS, we will give you a few recommendations on how to do this procedure safely and save you from wasting time, some of them will undoubtedly sound obvious to you, but you can never be too mindful :
- Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Cadillac ATS.
- The battery in your car is an energy accumulator, and can likely send out a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to ensure you take as little risk as possible.
- Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a safety measure, wear rubber gloves and goggles to protect you from splashing.
- At last when you go to the step how to disconnect the battery on your Cadillac ATS, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.
How to disconnect a battery on my Cadillac ATS: Take action
Let’s start now, the section that undoubtedly brings you on this page, how to disconnect a battery on your Cadillac ATS. So, after having taken all the precautions we listed just before, you will finally be able to attack the removal of the battery from your car. To do this, it will be fairly simple. First you will have to take out the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is completed, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is linked to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would cause a short circuit. Now you can disconnect the positive terminal of the battery from your Cadillac ATS. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To achieve this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Be cautious though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just learned the methodology for how to disconnect a battery on your Cadillac ATS, if you follow all the safety instructions, everything should go well. If you want to find out how to safely reconnect your battery, check out this article content, and if you want more information about your Cadillac ATS, we have a directory of articles dedicated to your automobile.
If you want more tutorials on the Cadillac ATS, go to our Cadillac ATS category.