You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is loaded with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve written and published this content to help you, because in this article you’re going to find out how to install a car radio on your Cadillac ATS. To make this happen, first we will see how to remove the old car radio, then how to install a car radio on Cadillac ATS and to finish, how to connect it.

install-car-radio-cadillac-ats

How to install car radio on Cadillac ATS: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Cadillac ATS, there is one essential step, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two options depending on the stereo that equips your Cadillac ATS:

  • Original car radio:
    In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Cadillac ATS. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this situation the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Cadillac ATS: Fitting and connecting the car radio

Let’s go to the essential section for you, how to install a car stereo on your Cadillac ATS. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Cadillac ATS, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Cadillac ATS, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Cadillac ATS, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.

If you want more guides on the Cadillac ATS, go to our Cadillac ATS category.