How to disable the immobiliser Peugeot 107 ?

Your Peugeot 107 doesn’t want to start? Have you analyzed all sorts of things? Battery, alternator, spare keys… And you feel like the trouble comes from your immobiliser ? It is certainly plausible, indeed that it is in question if your vehicule no longer wants to start or stalls when starting without a reason. You want to disable the immobiliser on your Peugeot 107 ? You are on the good article, we have created this post to help you see more clearly and resolve your trouble relating to this part. First, we will see how the immobiliser works on your Peugeot 107, then the different methods to disable it.

How your immobiliser system works on Peugeot 107

Before describing the different choices available to you, here is a short introduction to describe the goal and functions of the immobilizer in your Peugeot 107. This electronic component appeared 30 years ago and aspires to prevent the theft of your Peugeot 107. Actually, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Peugeot 107 will go each time you insert the key in the ignition, it checks that the code emitted by your key is indeed the one required by your immobilization box. It is only at this instant, that it will enable you to turn on your car. It is thanks to RFID technology (chip in the key) that this unit will work.

First methodology, your key no longer enables your Peugeot 107 to start, you want to disable the immobiliser of your Peugeot 107, but first of all you should try this process to start it and take it to a mechanic examine that you can not execute a less significant process to bring back the normal start of your automobile. Actually, with your automobile you should have a spare key (which you should try and which should start your Peugeot 107), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your automobile by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, duplicate the process until you have entered the full code. This should enable you to start your Peugeot 107 without having to remove the immobiliser.

Repair your key at a key specialist or your dealer

If even though a battery change, several tries to enter the immobiliser code on your Peugeot 107 still doesn’t want to start, it’s probably your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Peugeot 107. Actually, your transponder must have been affected or must have fallen off your key. To correct this trouble, only solution, go to a key specialist (also available on the internet) or, at your car dealer who can restore your Peugeot 107 key. Depending on who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Peugeot 107.

Manually remove your immobilizer

Although you may be attracted to bypass the immobilizer from your Peugeot 107, this is not advised at all for different reasons. First your Peugeot 107 would be much more vulnerable to theft attempts. Actually, without an immobiliser box, simply doing “the wires” may be enough to start it. In addition to that, your insurance, in case of theft most likely won’t refund you if it acknowledges that the immobiliser on your Peugeot 107 has been removed, bypassed or deactivated. This if you still want to do it, some sites still give the technique, we have made the choice not to disclose it, because it could benefit people with bad intentions.

If you want more tutorials on the Peugeot 107, go to our Peugeot 107 category.