How to disable the immobiliser Peugeot 306 ?

Your Peugeot 306 doesn’t want to start? Have you tried all kinds of things? Battery, alternator, spare keys… And you feel like the problem emanates from your immobiliser ? It is quite plausible, actually that it is in question if your vehicule no longer wants to start or stalls when starting for no reason. You want to disable the immobiliser on your Peugeot 306 ? You are on the good website, we have created this post to support you see more clearly and fix your problems connected to this part. First, we will see how the immobiliser works on your Peugeot 306, then the different ways to disable it.

How your immobiliser system works on Peugeot 306

Before describing the different alternatives available to you, here is a short intro to explain the role and operation of the immobilizer in your Peugeot 306. This electronic component was invented 30 years ago and aspires to prevent the theft of your Peugeot 306. Indeed, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Peugeot 306 will go each time you place the key in the ignition, it checks that the code emitted by your key is actually the one required by your immobilization box. It is only at this moment, that it will permit you to turn on your car. It is thanks to RFID technology (chip in the key) that this device will work.

First methodology, your key no longer allows your Peugeot 306 to start, you want to deactivate the immobiliser of your Peugeot 306, but first of all you should try this approach to start it and take it to a garage check that you can not do a less important process to restore the normal start of your vehicle. Indeed, with your vehicle you should have a spare key (which you should try and which should start your Peugeot 306), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your vehicle by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, repeat the process until you have entered the full code. This should enable you to start your Peugeot 306 without having to remove the immobiliser.

Fix your key at a key specialist or your car dealer

If in spite of a battery swap, different tries to enter the immobiliser code on your Peugeot 306 still doesn’t work, it’s almost certainly your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Peugeot 306. Indeed, your transponder must have been weakened or must have fallen off your key. To resolve this problem, only option, go to a key specialist (also available on the internet) or, at your car dealer who can repair your Peugeot 306 key. Determined by who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Peugeot 306.

Manually remove your immobilizer

Although you may be thinking to bypass the immobilizer from your Peugeot 306, this is not recommended at all for different reasons. First your Peugeot 306 would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to start it. Furthermore to that, your insurance, in case of theft most likely won’t refund you if it realizes that the immobiliser on your Peugeot 306 has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the method, we have made the choice not to disclose it, because it could help people with bad intentions.

If you have any additional questions about the Peugeot 306, do not hesitate to consult our Peugeot 306 category.