Your Kia Cee D doesn’t want to start? Have you tested all kinds of things? Battery, alternator, spare keys… And you feel like the problem emanates from your immobiliser ? It is certainly possible, in fact that it is in question if your car doesn’t want to start anymore or stalls when starting without a reason. You want to disable the immobiliser on your Kia Cee D ? You are on the good website, we have made this post to support you see more clearly and fix your trouble relating to this part. First, we will see how the immobiliser functions on your Kia Cee D, then the different techniques to disable it.
How your immobiliser system functions on Kia Cee D
Before describing the different solutions available to you, here is a short introduction to show you the aim and operation of the immobilizer in your Kia Cee D. This electronic part came out 30 years ago and intends to prevent the theft of your Kia Cee D. Indeed, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Kia Cee D will go each time you place the key in the ignition, it controls that the code emitted by your key is in fact the one asked by your immobilization box. It is only at this moment, that it will let you start. It is thanks to RFID technology (chip in the key) that this device will work.
The different solutions to bypass the immobiliser on your Kia Cee D
Enter the code to turn off the immobiliser
First technique, your key no longer enables your Kia Cee D to start, you want to deactivate the immobiliser of your Kia Cee D, but first of all you should try this procedure to start it and take it to a mechanic check that you can not perform a less important operation to restore the normal start of your car. Indeed, with your car you should have a spare key (which you should try and which should start your Kia Cee D), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, replicate the operation until you have entered the entire code. This should enable you to start your Kia Cee D without having to remove the immobiliser.
Repair your key at a key specialist or your dealer
If despite a battery change, different attempts to enter the immobiliser code on your Kia Cee D still doesn’t work, it’s most likely your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Kia Cee D. Indeed, your transponder must have been damaged or must have fallen off your key. To resolve this problem, only solution, go to a key specialist (also available on the internet) or, at your car dealer who can fix your Kia Cee D key. Based on who you go to the repair should cost you about 100 euros if you still have a copy or your “code card” and about 350 euros at your car dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Kia Cee D.
Manually remove your immobilizer
Although you may be attracted to bypass the immobilizer from your Kia Cee D, this is not recommended at all for different reasons. First your Kia Cee D would be much more vulnerable to theft attempts. Indeed, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. In addition to that, your insurance, in case of theft most likely won’t refund you if it realizes that the immobiliser on your Kia Cee D has been removed, bypassed or deactivated. This if you still want to do it, some sites still give the method, we have made the choice not to disclose it, because it could benefit people with bad intentions.
To get more tips on the Kia Cee D, take a look at the Kia Cee D category.
