Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always operational is necessary. In fact, bulbs are wearing units that will predictably burn out after a while and therefore need to be changed. You’re probably here because one of your parking lights is burnt out and you’re questioning how to change your Kia Cee D’s license plate bulb, we’ve written and published this article content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Cee D.
How to change the license plate bulb on your Kia Cee D through the outside
This solution is the quickest of the two, in truth, for this one you will only have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to clarify the method.
So let’s start with swapping the number plate bulb by going through the outside of your Kia Cee D. Regardless whether it’s the front or the back of your car the operation will be identical.
Here are a few simple steps to stick to to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Cee D
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of breaking something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Kia Cee D without outside access
Second part of our content, change this license plate bulb on your Kia Cee D without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Kia Cee D
To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Kia Cee D
Finally last option, you must change the bulb on the backplate of your Kia Cee D, but you cannot really open the cover from the outside of your car. In this instance, here is the process to accomplish this operation:
- Unplug the battery from your Kia Cee D
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Kia Cee D, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Kia Cee D. If you desire to change other bulbs like the position light bulbs on your Kia Cee D or the low beam bulbs on Kia Cee D, don’t hesitate to browse our content articles which explain you the process to follow.
If you wish more guides on the Kia Cee D, go to our Kia Cee D category.
