Your Acura TSX doesn’t start anymore? Have you analyzed all sorts of things? Battery, alternator, spare keys… And you feel like the trouble comes from your immobiliser ? It is actually quite possible, actually that it is in question if your car no longer wants to start or stalls when starting without a reason. You want to disable the immobiliser on your Acura TSX ? You are in the right place, we have written this content to support you see more clearly and solve your trouble linked to this part. First, we will see how the immobiliser works on your Acura TSX, then the different methods to disable it.
How your immobiliser system works on Acura TSX
Before describing the different choices available to you, here is a short introduction to describe the goal and operation of the immobilizer in your Acura TSX. This electronic component appeared 30 years ago and aspires to prevent the theft of your Acura TSX. In fact, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Acura TSX will go each time you place the key in the ignition, it checks that the code emitted by your key is actually the one asked by your immobilization box. It is only at this moment, that it will allow you to start. It is thanks to RFID technology (chip in the key) that this device will work.
The different solutions to bypass the immobiliser on your Acura TSX
Enter the code to turn off the immobiliser
First methodology, your key no longer allows your Acura TSX to start, you want to deactivate the immobiliser of your Acura TSX, but first of all you should try this technique to start it and take it to a mechanic examine that you can not perform a less significant procedure to restore the normal start of your car. In fact, with your car you should have a spare key (which you should try and which should start your Acura TSX), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your car by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, duplicate the procedure until you have entered the full code. This should enable you to start your Acura TSX without having to remove the immobiliser.
Repair your key at a key specialist or your car dealer
If in spite of a battery swap, different tries to enter the immobiliser code on your Acura TSX still doesn’t want to start, it’s probably your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Acura TSX. In fact, your transponder must have been injured or must have fallen off your key. To resolve this trouble, only option, go to a key specialist (also available on the internet) or, at your dealer who can restore your Acura TSX key. Determined by who you go to the repair should cost you about 100 euros if you still have a copy or your “code card” and about 350 euros at your dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Acura TSX.
Manually remove your immobilizer
Although you may be attracted to bypass the immobilizer from your Acura TSX, this is not advised at all for many reasons. First your Acura TSX would be much more vulnerable to theft attempts. In fact, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. Furthermore to that, your insurance, in case of theft most likely won’t refund you if it realizes that the immobiliser on your Acura TSX has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the method, we have made the choice not to disclose it, because it could help people with bad intentions.
To get more tips on the Acura TSX, take a look at the Acura TSX category.
