Vehicle maintenance is one of the essential duties you need to do if you want to keep your car in good condition and avoid sudden malfunctions that would necessitate you to waste a lot of money. Some maintenance work seem obvious to almost all people, just like oil and filter changes, but for others you may not always be aware of them. Today we’re going to look into a less notorious but equally important maintenance task, how to change the cabin filter on my Acura TSX? For this, first we’ll check out where the cabin filter on your Acura TSX is, and secondly how to replace this popular filter, as well called pollen filter.
Where is the cabin filter on my Acura TSX?
So let’s start our content page with location of the cabin filter on your Acura TSX. Determined by the year of your motor vehicle and the series, the filter can be found in three different spots, we will now detail these locations.
Passenger compartment filter found in the engine compartment
To find the cabin filter of your Acura TSX?, we suggest you to take a look at the side of the engine compartment, in truth, it is one of the most popular spots for car makers. This is only because this is where the Acura TSX’s external air intake is located. This is where your vehicule will supply air to your passenger compartment. It is most of the time located just below the windscreen, at the level of the air vents, you can access it through the bonnet of your car, it will be in a plastic box.
Cabin filter which is under the glove box of an Acura TSX
The second possible position for the cabin filter on your Acura TSX is under the glove compartment of your motor vehicle. This is the most simple place to access, you will just have to lie down and look under your glove box and you should find a black box containing the pollen filter, just unclip it to access your filter.
Cabin filter which is under the dashboard of your Acura TSX
Finally, last location where the cabin filter on your Acura TSX can be found is under your dashboard, to access it you will have to remove your glove box which is generally held by clips or a screw. Now that this is done, you should see the black box it is in.
How to replace the cabin filter of my Acura TSX?
Finally, we will now teach you how to replace the cabin filter of your Acura TSX? Even though this is a rather basic step, it must be done at the right time to avoid problems on your motor vehicle.
When to replace the cabin filter on Acura TSX?
The big question for most Acura TSX owners is when to replace this filter, because we know that you have to change it every 20,000 kilometres; don’t hesitate to read our content page on the removal of the service indicator light; however, for the cabin filter, it’s a entire other question. It should be changed every year if you use your motor vehicle regularly or every two years if you drive in the country and only make short trips. The purpose of this filter is to filter out air impurities, allergens and exhaust fumes. Do not hesitate to replace it more regularly if you drive in city.
How to remove the cabin filter on my Acura TSX?
Last but not least, the last step that certainly draws you to this tips guide, how to remove the cabin filter from your Acura TSX? This step is in fact very common. Once you’ve found the position of the filter, all you have to do is to unclip the box in which it is located and gently pull it out. Be careful when taking it out to look carefully in which direction it is positioned (you will often find an arrow that gives the direction of the air), so remember to position your new filter in the same direction. You just have to close and re-clip the box and you’re done changing the cabin filter of your Acura TSX.
If you have any further questions about the Acura TSX, do not hesitate to consult our Acura TSX category.
