Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Subaru Impreza is one of the most classics. Although this act is very easy to carry out, some of you are most likely questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Subaru Impreza? We will now answer these questions.


Advantage to always have the brake fluid level up in your Subaru Impreza

So we start our article with the significance of looking at the brake fluid level on a Subaru Impreza. This fluid has an important role on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently imperative to verify the brake fluid level of your Subaru Impreza on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its features. This operation is really simple and does not require evolved expertise of mechanics, so it is easy for all Subaru Impreza owners to do it on their own. If the Brake light on the dashboard of your Subaru Impreza does not correspond to a lack of brake fluid, do not be reluctant to seek advice from our article for details. Nevertheless, there are some measures and rules to respect that we will notice in the following part of this article.

How to fill up the brake fluid of a Subaru Impreza

So now we will describe to you how to do the brake fluid level on a Subaru Impreza. Please take note that this is very elementary to perform. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this information in the user manual of your Subaru Impreza. Now here are the steps to follow to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap mindfully so as not to make any problems within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Subaru Impreza up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Subaru Impreza, remember to verify the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the data you need to properly fill the brake fluid level of your Subaru Impreza.

If you want more guides on the Subaru Impreza, go to our Subaru Impreza category.