Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Renault Master is one of the most classics. Although this action is simple to perform, some of you are likely questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Renault Master? We will now answer these questions.
Benefit to always have the brake fluid level up in your Renault Master
So we begin our guideline with the significance of verifying the brake fluid level on a Renault Master. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently imperative to verify the brake fluid level of your Renault Master frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because as time passes the brake fluid will lose its properties. This process is extremely simple and does not require amazing expertise of mechanics, so it is easy for all Renault Master owners to do it themselves. If the Brake light on the dashboard of your Renault Master does not correspond to a lack of brake fluid, do not think twice to seek advice from our guideline for details. However, there are some measures and rules to follow that we will see in the next section of this guideline.
How to fill up the brake fluid of a Renault Master
So now we will show to you how to do the brake fluid level on a Renault Master. Please note that this is very basic to carry out. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this info in the user manual of your Renault Master. Now here are the steps to follow to make your level:
- Open your cover and locate your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once uncovered, examine the instructions on the cap attentively so as not to make any problems during the process, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Renault Master up to the mark “Max”.
- If the level was beneath the “Min” mark before you inspected the brake fluid level in your Renault Master, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Renault Master.
In the event that you have any additional questions about the Renault Master, do not hesitate to consult our Renault Master category.
