Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your skoda octavia is one of the most classics. Nevertheless this work is elementary to perform, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your skoda octavia? We will now answer these questions.
Advantage to always have the brake fluid level up in your skoda octavia
So we commence our content with the interest of checking the brake fluid level on a skoda octavia. This fluid has a vital role on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is consequently important to verify the brake fluid level of your skoda octavia often (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its attributes. This operation is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all skoda octavia owners to do it themselves. If the Brake light on the dashboard of your skoda octavia does not correspond to a lack of brake fluid, do not hesitate to browse our content for details. On the other hand, there are some measures and rules to follow that we will see in the following part of this content.
How to fill up the brake fluid of a skoda octavia
So now we will show to you how to do the brake fluid level on a skoda octavia. Please be aware that this is very elementary to accomplish. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your skoda octavia. Now here are the steps to adhere to to make your level:
- Open your bonnet and identify your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
- Once located, read the instructions on the cap carefully so as not to make any problems during the operation, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your skoda octavia up to the mark “Max”.
- If the level was under the “Min” mark before you checked the brake fluid level in your skoda octavia, be sure to verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your skoda octavia.
If you wish more guides on the skoda octavia, go to our skoda octavia category.
