Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Mercedes Benz Sprinter is one of the most classics. Even though this action is basic to complete, some of you are most likely wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes Benz Sprinter? We will now answer these questions.
Benefit to always have the brake fluid level up in your Mercedes Benz Sprinter
So we start our content with the significance of looking at the brake fluid level on a Mercedes Benz Sprinter. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently necessary to check the brake fluid level of your Mercedes Benz Sprinter frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its properties. This operation is really simple and does not require amazing experience of mechanics, so it is easy for all Mercedes Benz Sprinter owners to do it themselves. If the Brake light on the dashboard of your Mercedes Benz Sprinter does not match to a lack of brake fluid, do not hesitate to consult our content for details. Nevertheless, there are some precautions and rules to follow that we will discover in the following part of this content.
How to fill up the brake fluid of a Mercedes Benz Sprinter
So now we will describe to you how to do the brake fluid level on a Mercedes Benz Sprinter. Please note that this is very simple to accomplish. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this information in the user manual of your Mercedes Benz Sprinter. Now here are the steps to stick to to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
- Once established, read the instructions on the cap attentively so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Benz Sprinter up to the mark “Max”.
- If the level was below the “Min” mark before you checked the brake fluid level in your Mercedes Benz Sprinter, remember to check the level in a few days/weeks to be certain you don’t have a leak in the brake system
That’s it, you now have all the data you need to securely fill the brake fluid level of your Mercedes Benz Sprinter.
If perhaps you have any additional questions about the Mercedes Benz Sprinter, do not hesitate to consult our Mercedes Benz Sprinter category.