Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Mercedes Benz CLA Class is one of the most classics. Even though this act is basic to conduct, some of you are almost certainly wondering why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Mercedes Benz CLA Class? We will now answer these questions.
Advantage to always have the brake fluid level up in your Mercedes Benz CLA Class
So we begin our article content with the significance of verifying the brake fluid level on a Mercedes Benz CLA Class. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is therefore imperative to verify the brake fluid level of your Mercedes Benz CLA Class frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its features. This operation is really simple and does not require evolved knowledge of mechanics, so it is easy for all Mercedes Benz CLA Class owners to do it on their own. If the Brake light on the dashboard of your Mercedes Benz CLA Class does not correspond to a lack of brake fluid, do not hesitate to read our article content for details. However, there are some precautions and rules to respect that we will see in the next section of this article content.
How to fill up the brake fluid of a Mercedes Benz CLA Class
So now we will describe to you how to do the brake fluid level on a Mercedes Benz CLA Class. Please take note that this is very elementary to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Mercedes Benz CLA Class. Now here are the steps to follow to make your level:
- Open your bonnet and identify your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
- Once uncovered, read the instructions on the cap attentively so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mercedes Benz CLA Class up to the mark “Max”.
- If the level was below the “Min” mark before you examined the brake fluid level in your Mercedes Benz CLA Class, make sure to verify the level in a few days/weeks to be certain you don’t have a leak in the brake system
That’s it, you now have all the data you need to properly fill the brake fluid level of your Mercedes Benz CLA Class.
To find more tips on the Mercedes Benz CLA Class, take a look at the Mercedes Benz CLA Class category.