Among the small routine service works that you should do regularly on your car, to fill up the brake fluid level of your Mazda 3 is one of the great classics. Even though this work is basic to conduct, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mazda 3? We will now answer these questions.


Benefit to always have the brake fluid level up in your Mazda 3

So we commence our article with the interest of verifying the brake fluid level on a Mazda 3. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is as a result very important to check the brake fluid level of your Mazda 3 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its features. This operation is extremely simple and does not require amazing experience of mechanics, so it is easy for all Mazda 3 owners to do it on their own. If the Brake light on the dashboard of your Mazda 3 does not match to a lack of brake fluid, do not be reluctant to browse our article for details. Nevertheless, there are some precautions and rules to respect that we will notice in the up coming section of this article.

How to fill up the brake fluid of a Mazda 3

So now we will describe to you how to do the brake fluid level on a Mazda 3. Please notice that this is very simple to perform. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Mazda 3. Now here are the steps to follow to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, examine the instructions on the cap attentively so as not to make any problems within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mazda 3 up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Mazda 3, make sure you check the level in a few days/weeks to ensure that you don’t have a leak in the brake system

That’s it, you now have all the data you need to securely fill the brake fluid level of your Mazda 3.

To find more tips on the Mazda 3, take a look at the Mazda 3 category.