Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Ford Focus is one of the great classics. Nevertheless this act is basic to do, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Ford Focus? We will now answer these questions.


Advantage to always have the brake fluid level up in your Ford Focus

So we start our guideline with the interest of checking the brake fluid level on a Ford Focus. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is therefore fundamental to check the brake fluid level of your Ford Focus often (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid will lose its features. This procedure is specially simple and does not require evolved expertise of mechanics, so it is easy for all Ford Focus owners to do it themselves. If the Brake light on the dashboard of your Ford Focus does not match to a lack of brake fluid, do not think twice to browse our guideline for details. However, there are some measures and rules to respect that we will check out in the following part of this guideline.

How to fill up the brake fluid of a Ford Focus

So now we will explain to you how to do the brake fluid level on a Ford Focus. Please take note that this is very elementary to carry out. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this info in the user manual of your Ford Focus. Now here are the steps to follow to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap mindfully so as not to make any problems within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford Focus up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Ford Focus, make sure to check the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the data you need to properly fill the brake fluid level of your Ford Focus.

If you need more tutorials on the Ford Focus, go to our Ford Focus category.