Among the small maintenance acts that you should do regularly on your car, to fill up the brake fluid level of your Land Rover LR4 is one of the most classics. Nevertheless this action is elementary to complete, some of you are almost certainly trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Land Rover LR4? We will now answer these questions.


Advantage to always have the brake fluid level up in your Land Rover LR4

So we begin our content page with the benefit of verifying the brake fluid level on a Land Rover LR4. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is as a result fundamental to check the brake fluid level of your Land Rover LR4 frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its features. This procedure is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Land Rover LR4 owners to do it themselves. If the Brake light on the dashboard of your Land Rover LR4 does not correspond to a lack of brake fluid, do not be reluctant to browse our content page for details. On the other hand, there are some measures and rules to follow that we will notice in the following part of this content page.

How to fill up the brake fluid of a Land Rover LR4

So now we will learn to you how to do the brake fluid level on a Land Rover LR4. Please notice that this is very basic to complete. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Land Rover LR4. Now here are the steps to follow to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once located, browse the instructions on the cap attentively so as not to make any mistakes during the procedure, we advise you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Land Rover LR4 up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Land Rover LR4, remember to check the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the info you need to safely fill the brake fluid level of your Land Rover LR4.

If you wish more guides on the Land Rover LR4, go to our Land Rover LR4 category.