Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Hyundai Santa Fe is one of the most classics. Even though this process is basic to conduct, some of you are probably concerned about why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Hyundai Santa Fe? We will now answer these questions.


Benefit to always have the brake fluid level up in your Hyundai Santa Fe

So we start our guideline with the benefit of looking at the brake fluid level on a Hyundai Santa Fe. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is as a result important to verify the brake fluid level of your Hyundai Santa Fe frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid will lose its features. This operation is really simple and does not require evolved knowledge of mechanics, so it is easy for all Hyundai Santa Fe owners to do it themselves. If the Brake light on the dashboard of your Hyundai Santa Fe does not match to a lack of brake fluid, do not hesitate to seek advice from our guideline for details. On the other hand, there are some measures and rules to follow that we will check out in the next section of this guideline.

How to fill up the brake fluid of a Hyundai Santa Fe

So now we will explain to you how to do the brake fluid level on a Hyundai Santa Fe. Please notice that this is very basic to accomplish. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Hyundai Santa Fe. Now here are the steps to adhere to to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once located, browse the instructions on the cap cautiously so as not to make any problems within the the operation, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Hyundai Santa Fe up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Hyundai Santa Fe, remember to verify the level in a few days/weeks to be certain you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Hyundai Santa Fe.

To discover more tips on the Hyundai Santa Fe, take a look at the Hyundai Santa Fe category.