No matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, being sure your turn signal bulbs are constantly functioning is very important. Obviously, bulbs are wearing devices that will inevitably burn out as time passes and consequently need to be swapped out. You’re most likely in this article because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Hyundai Santa Fe, we’ve written this post to enable you do it by yourself without having to go to your mechanic. To begin , we will look at examining a burnt-out rear turn signal bulb on your Hyundai Santa Fe and in a second step, how to replace the rear turn signal bulb on your Hyundai Santa Fe.
How do you know if the rear turn signal bulb on your Hyundai Santa Fe is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the possibility to verify all the safety features of your Hyundai Santa Fe. Obviously, you are quite often on the go and tend to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore fundamental to make the effort to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Hyundai Santa Fe, but you didn’t become aware of it. Here are the two simple techniques to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Hyundai Santa Fe, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Hyundai Santa Fe, you will perceive that the time between each “click” is much closer, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to replace, like the one of your low beam Hyundai Santa Fe or your position lights on Hyundai Santa Fe, don’t be reluctant to have a look at our articles to help you to realize this substitution.
Changing the rear turn signal bulb on my Hyundai Santa Fe
Now let’s go to the most instersting step of this article, how to replace the rear turn signal bulb on Hyundai Santa Fe? Take note that this procedure is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Hyundai Santa Fe, see our specific article. Nevertheless, here are the full description to follow to be able to do this process accurately:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Hyundai Santa Fe. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively
.
If you wish more guides on the Hyundai Santa Fe, go to our Hyundai Santa Fe category.
