Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Ford Fusion is one of the most classics. Even though this action is basic to carry out, some of you are almost certainly concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Ford Fusion? We will now answer these questions.

check-brake-fluid-level-ford-fusion

Benefit to always have the brake fluid level up in your Ford Fusion

So we commence our article content with the significance of verifying the brake fluid level on a Ford Fusion. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is therefore imperative to check the brake fluid level of your Ford Fusion often (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its properties. This procedure is specially simple and does not require amazing expertise of mechanics, so it is easy for all Ford Fusion owners to do it on their own. If the Brake light on the dashboard of your Ford Fusion does not correspond to a lack of brake fluid, do not hesitate to read our article content for details. Nevertheless, there are some precautions and rules to respect that we will discover in the following section of this article content.

How to fill up the brake fluid of a Ford Fusion

So now we will explain to you how to do the brake fluid level on a Ford Fusion. Please note that this is very elementary to accomplish. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Ford Fusion. Now here are the steps to stick to to make your level:

  • Open your hood and locate your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap mindfully so as not to make any problems within the the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford Fusion up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Ford Fusion, make sure to check the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Ford Fusion.

Whenever you have any additional questions about the Ford Fusion, do not hesitate to consult our Ford Fusion category.