Among the small maintenance works that you should do regularly on your car, to fill up the brake fluid level of your Bmw 1 series is one of the most classics. Although this action is simple to carry out, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Bmw 1 series? We will now answer these questions.


Advantage to always have the brake fluid level up in your Bmw 1 series

So we begin our content with the benefit of checking the brake fluid level on a Bmw 1 series. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is consequently essential to examine the brake fluid level of your Bmw 1 series often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid will lose its properties. This process is extremely simple and does not require amazing experience of mechanics, so it is easy for all Bmw 1 series owners to do it on their own. If the Brake light on the dashboard of your Bmw 1 series does not match to a lack of brake fluid, do not be reluctant to read our content for details. On the other hand, there are some precautions and rules to follow that we will notice in the following part of this content.

How to fill up the brake fluid of a Bmw 1 series

So now we will explain to you how to do the brake fluid level on a Bmw 1 series. Please note that this is very elementary to accomplish. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this data in the user manual of your Bmw 1 series. Now here are the steps to follow to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once located, browse the instructions on the cap mindfully so as not to make any mistakes within the the process, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Bmw 1 series up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Bmw 1 series, remember to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

That’s it, you now have all the data you need to securely fill the brake fluid level of your Bmw 1 series.

Whenever you have any additional questions about the Bmw 1 series, do not hesitate to consult our Bmw 1 series category.