Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi S4 is one of the most classics. Although this work is basic to complete, some of you are likely questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Audi S4? We will now answer these questions.

check-brake-fluid-level-audi-s4

Advantage to always have the brake fluid level up in your Audi S4

So we begin our article content with the interest of verifying the brake fluid level on a Audi S4. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently essential to check the brake fluid level of your Audi S4 often (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its features. This process is particularly simple and does not require evolved experience of mechanics, so it is easy for all Audi S4 owners to do it themselves. If the Brake light on the dashboard of your Audi S4 does not match to a lack of brake fluid, do not be reluctant to seek advice from our article content for details. On the other hand, there are some safety measures and rules to follow that we will notice in the up coming part of this article content.

How to fill up the brake fluid of a Audi S4

So now we will explain to you how to do the brake fluid level on a Audi S4. Please be aware that this is very basic to carry out. On the other hand, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Audi S4. Now here are the steps to stick to to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to find, it is generally made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap cautiously so as not to make any problems during the process, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Audi S4 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Audi S4, make sure you check the level in a few days/weeks to ensure that you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to properly fill the brake fluid level of your Audi S4.

To get more tips on the Audi S4, take a look at the Audi S4 category.