Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi Tt is one of the most classics. Even though this action is simple to carry out, some of you are most probably wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Audi Tt? We will now answer these questions.

check-brake-fluid-level-audi-tt

Benefit to always have the brake fluid level up in your Audi Tt

So we start our content with the interest of verifying the brake fluid level on a Audi Tt. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is as a result important to examine the brake fluid level of your Audi Tt regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its characteristics. This process is really simple and does not require advanced knowledge of mechanics, so it is easy for all Audi Tt owners to do it themselves. If the Brake light on the dashboard of your Audi Tt does not match to a lack of brake fluid, do not be reluctant to seek advice from our content for details. However, there are some precautions and rules to respect that we will notice in the up coming part of this content.

How to fill up the brake fluid of a Audi Tt

So now we will describe to you how to do the brake fluid level on a Audi Tt. Please notice that this is very elementary to do. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Audi Tt. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap carefully so as not to make any mistakes within the the process, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi Tt up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Audi Tt, remember to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Audi Tt.

To get more tips on the Audi Tt, take a look at the Audi Tt category.