Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi Rs4 is one of the great classics. Nevertheless this act is basic to carry out, some of you are likely wanting to know why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Audi Rs4? We will now answer these questions.
Advantage to always have the brake fluid level up in your Audi Rs4
So we commence our content page with the interest of checking the brake fluid level on a Audi Rs4. This fluid has a vital role on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is as a result important to examine the brake fluid level of your Audi Rs4 frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because after some time the brake fluid loses its features. This operation is specially simple and does not require evolved knowledge of mechanics, so it is easy for all Audi Rs4 owners to do it on their own. If the Brake light on the dashboard of your Audi Rs4 does not correspond to a lack of brake fluid, do not hesitate to have a look at our content page for details. However, there are some measures and rules to follow that we will discover in the up coming section of this content page.
How to fill up the brake fluid of a Audi Rs4
So now we will show to you how to do the brake fluid level on a Audi Rs4. Please notice that this is very simple to carry out. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Audi Rs4. Now here are the steps to follow to make your level:
- Open your hood and situate your brake fluid reservoir, it is very easy to find, it is in general made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
- Once identified, examine the instructions on the cap cautiously so as not to make any mistakes within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi Rs4 up to the mark “Max”.
- If the level was below the “Min” mark before you checked the brake fluid level in your Audi Rs4, make sure examine the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Audi Rs4.
Whenever you have any further questions about the Audi Rs4, do not hesitate to consult our Audi Rs4 category.
