Among the small service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi Q5 is one of the great classics. Nevertheless this process is basic to complete, some of you are most probably attempting to find why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Audi Q5? We will now answer these questions.

check-brake-fluid-level-audi-q5

Advantage to always have the brake fluid level up in your Audi Q5

So we start our guideline with the interest of checking the brake fluid level on a Audi Q5. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently essential to check the brake fluid level of your Audi Q5 frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its features. This operation is specially simple and does not require amazing expertise of mechanics, so it is easy for all Audi Q5 owners to do it themselves. If the Brake light on the dashboard of your Audi Q5 does not correspond to a lack of brake fluid, do not hesitate to have a look at our guideline for details. Nevertheless, there are some precautions and rules to follow that we will discover in the up coming section of this guideline.

How to fill up the brake fluid of a Audi Q5

So now we will explain to you how to do the brake fluid level on a Audi Q5. Please notice that this is very simple to complete. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your Audi Q5. Now here are the steps to adhere to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap attentively so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi Q5 up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Audi Q5, make sure to check the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Audi Q5.

If you need more tutorials on the Audi Q5, go to our Audi Q5 category.