Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi Q2 is one of the most classics. Nevertheless this work is basic to execute, some of you are almost certainly wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Audi Q2? We will now answer these questions.

check-brake-fluid-level-audi-q2

Benefit to always have the brake fluid level up in your Audi Q2

So we start our guideline with the interest of checking the brake fluid level on a Audi Q2. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is therefore imperative to verify the brake fluid level of your Audi Q2 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid will lose its features. This operation is specially simple and does not require evolved expertise of mechanics, so it is easy for all Audi Q2 owners to do it on their own. If the Brake light on the dashboard of your Audi Q2 does not correspond to a lack of brake fluid, do not hesitate to browse our guideline for details. However, there are some precautions and rules to respect that we will check out in the next part of this guideline.

How to fill up the brake fluid of a Audi Q2

So now we will learn to you how to do the brake fluid level on a Audi Q2. Please take note that this is very elementary to carry out. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Audi Q2. Now here are the steps to adhere to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set over the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap cautiously so as not to make any mistakes within the the operation, we advise you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi Q2 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Audi Q2, make sure you verify the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Audi Q2.

If you have any further questions about the Audi Q2, do not hesitate to consult our Audi Q2 category.