Among the small maintenance acts that you should do regularly on your car, to fill up the brake fluid level of your Audi A1 is one of the most classics. Although this action is very easy to do, some of you are most likely concerned about why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Audi A1? We will now answer these questions.
Benefit to always have the brake fluid level up in your Audi A1
So we commence our content page with the significance of verifying the brake fluid level on a Audi A1. This fluid has a crucial task on your car, transmit the braking power to the wheels and thus stop your automobile. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is therefore very important to verify the brake fluid level of your Audi A1 often (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its features. This operation is extremely simple and does not require evolved knowledge of mechanics, so it is easy for all Audi A1 owners to do it on their own. If the Brake light on the dashboard of your Audi A1 does not correspond to a lack of brake fluid, do not be reluctant to consult our content page for details. However, there are some safety measures and rules to respect that we will check out in the following section of this content page.
How to fill up the brake fluid of a Audi A1
So now we will show to you how to do the brake fluid level on a Audi A1. Please notice that this is very basic to do. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this info in the user manual of your Audi A1. Now here are the steps to adhere to to make your level:
- Open your hood and locate your brake fluid reservoir, it is very easy to locate, it is in most cases made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap cautiously so as not to make any problems during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi A1 up to the mark “Max”.
- If the level was below the “Min” mark before you inspected the brake fluid level in your Audi A1, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Audi A1.
To get more tips on the Audi A1, take a look at the Audi A1 category.
