Among the small service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi E-Tron is one of the most classics. Although this act is very easy to execute, some of you are likely wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Audi E-Tron? We will now answer these questions.
Advantage to always have the brake fluid level up in your Audi E-Tron
So we begin our guideline with the benefit of checking the brake fluid level on a Audi E-Tron. This fluid has an important function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result fundamental to verify the brake fluid level of your Audi E-Tron on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its properties. This operation is extremely simple and does not require amazing expertise of mechanics, so it is easy for all Audi E-Tron owners to do it on their own. If the Brake light on the dashboard of your Audi E-Tron does not match to a lack of brake fluid, do not be reluctant to have a look at our guideline for details. Nevertheless, there are some safety measures and rules to respect that we will see in the up coming section of this guideline.
How to fill up the brake fluid of a Audi E-Tron
So now we will describe to you how to do the brake fluid level on a Audi E-Tron. Please take note that this is very simple to perform. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this data in the user manual of your Audi E-Tron. Now here are the steps to stick to to make your level:
- Open your bonnet and situate your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once found, read the instructions on the cap cautiously so as not to make any problems within the the operation, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Audi E-Tron up to the mark “Max”.
- If the level was under the “Min” mark before you inspected the brake fluid level in your Audi E-Tron, make sure verify the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Audi E-Tron.
To discover more tips on the Audi E-Tron, take a look at the Audi E-Tron category.
