Among the small service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Audi A2 is one of the most classics. Although this work is very easy to perform, some of you are almost certainly trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Audi A2? We will now answer these questions.

check-brake-fluid-level-audi-a2

Benefit to always have the brake fluid level up in your Audi A2

So we begin our content with the benefit of looking at the brake fluid level on a Audi A2. This fluid has a crucial role on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore very important to check the brake fluid level of your Audi A2 frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its features. This operation is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Audi A2 owners to do it themselves. If the Brake light on the dashboard of your Audi A2 does not match to a lack of brake fluid, do not hesitate to browse our content for details. Nevertheless, there are some safety measures and rules to follow that we will check out in the next part of this content.

How to fill up the brake fluid of a Audi A2

So now we will learn to you how to do the brake fluid level on a Audi A2. Please notice that this is very simple to complete. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this data in the user manual of your Audi A2. Now here are the steps to adhere to to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once discovered, read the instructions on the cap attentively so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Audi A2 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Audi A2, make sure you check the level in a few days/weeks to be certain you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely and securely fill the brake fluid level of your Audi A2.

In the event that you have any further questions about the Audi A2, do not hesitate to consult our Audi A2 category.