Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Alfa Romeo 159 is one of the great classics. Even though this process is simple to do, some of you are most likely trying to figure out why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Alfa Romeo 159? We will now answer these questions.
Benefit to always have the brake fluid level up in your Alfa Romeo 159
So we commence our guideline with the benefit of looking at the brake fluid level on a Alfa Romeo 159. This fluid has a fundamental role on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is as a result fundamental to verify the brake fluid level of your Alfa Romeo 159 often (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its properties. This process is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Alfa Romeo 159 owners to do it on their own. If the Brake light on the dashboard of your Alfa Romeo 159 does not correspond to a lack of brake fluid, do not think twice to browse our guideline for details. On the other hand, there are some safety measures and rules to follow that we will check out in the up coming section of this guideline.
How to fill up the brake fluid of a Alfa Romeo 159
So now we will explain to you how to do the brake fluid level on a Alfa Romeo 159. Please take note that this is very elementary to carry out. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this information in the user manual of your Alfa Romeo 159. Now here are the steps to follow to make your level:
- Open your hood and locate your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
- Once identified, read the instructions on the cap cautiously so as not to make any mistakes within the the process, we recommend you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Alfa Romeo 159 up to the mark “Max”.
- If the level was beneath the “Min” mark before you examined the brake fluid level in your Alfa Romeo 159, make sure to verify the level in a few days/weeks to be certain you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to properly fill the brake fluid level of your Alfa Romeo 159.
To find more tips on the Alfa Romeo 159, take a look at the Alfa Romeo 159 category.
