Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Acura ILX is one of the most classics. Although this action is simple to execute, some of you are probably questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Acura ILX? We will now answer these questions.


Advantage to always have the brake fluid level up in your Acura ILX

So we commence our guideline with the significance of looking at the brake fluid level on a Acura ILX. This fluid has an important task on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is therefore necessary to examine the brake fluid level of your Acura ILX frequently (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid loses its features. This process is specially simple and does not require advanced knowledge of mechanics, so it is easy for all Acura ILX owners to do it on their own. If the Brake light on the dashboard of your Acura ILX does not correspond to a lack of brake fluid, do not be reluctant to read our guideline for details. However, there are some precautions and rules to follow that we will discover in the following section of this guideline.

How to fill up the brake fluid of a Acura ILX

So now we will describe to you how to do the brake fluid level on a Acura ILX. Please note that this is very simple to accomplish. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will find this data in the user manual of your Acura ILX. Now here are the steps to follow to make your level:

  • Open your hood and locate your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is set above the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap attentively so as not to make any problems within the the process, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Acura ILX up to the mark “Max”.
  • If the level was below the “Min” mark before you examined the brake fluid level in your Acura ILX, make sure to examine the level in a few days/weeks to be sure you don’t have a leak in the brake system

That’s it, you now have all the information you need to securely fill the brake fluid level of your Acura ILX.

To find more tips on the Acura ILX, take a look at the Acura ILX category.