No matter if it’s for your own security, for roadworthiness testing or to prevent a fine, ensuring your turn signal bulbs are constantly functioning is necessary. In fact, bulbs are wearing parts that will predictably burn out after a while and as a result need to be replaced. You’re most probably on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Volkswagen Crafter 2, we’ve written this content to enable you do it by yourself without having to go to your motor mechanic. To begin , we will look at examining a burnt-out rear turn signal bulb on your Volkswagen Crafter 2 and in a second part, how to change the rear turn signal bulb on your Volkswagen Crafter 2.
How to find out if the rear turn signal bulb on your Volkswagen Crafter 2 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the possibility to examine all the security features of your Volkswagen Crafter 2. In fact, you are quite often in a rush and are likely to get into your vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is due to this fact essential to spend some time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volkswagen Crafter 2, but you didn’t perceive it. Here are the two basic solutions to examine if a rear turn signal on your car is out of order or if you need to change it as soon as possible:
- When you stop, turn on the ignition on your Volkswagen Crafter 2, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Volkswagen Crafter 2, you will notice that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Volkswagen Crafter 2 or your position lights on Volkswagen Crafter 2, don’t be reluctant to consult our publications to help you to complete this substitution.
Replacing the rear turn signal bulb on my Volkswagen Crafter 2
Now let’s go to the most instersting part of this content page, how to change the rear turn signal bulb on Volkswagen Crafter 2? You should be aware that this technique is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volkswagen Crafter 2, see our dedicated article. On the other hand, here are the detailed steps to follow to be able to do this process accurately:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Volkswagen Crafter 2. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating correctly
.
If perhaps you have any further questions about the Volkswagen Crafter 2, do not hesitate to consult our Volkswagen Crafter 2 category.
