It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly operational is extremely important. In reality, bulbs are wearing parts that will undoubtedly burn out after some time and as a result need to be swapped out. You’re most likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Volkswagen Crafter 2 parking light, we’ve posted this article content to help you do this process without hiring somebody and not need to go to your auto technician. In a first step, we will take a look at changing the front daytime running light bulb of your car and in a second section, how to replace the rear daytime running light.
How to replace the front parking light bulb of my Volkswagen Crafter 2?
We will begin this document with changing the front daytime running light bulb of your Volkswagen Crafter 2, take notice that depending on the year and finish of your car it may not be quite the same method to use. In reality, whether or not the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.
First method, we will accomplish the bulb swap of your daytime running light without removing the headlight of your Volkswagen Crafter 2. Although this method is the simplest, it is not assured that you will be able to accomplish it on your motor vehicle without encumbrance. In reality, dependant on the options and the year, on some versions there will not be enough space for you to replace the bulb using this method. Here are the two different techniques to replace the bulb of the front parking light of your Volkswagen Crafter 2:.
- Going through the bonnet of your car: First technique, you will only go through the bonnet of your motor vehicle to access your headlight unit. This is the most rational technique but it is not always easy to do to accomplish, often because of secondary auto parts that will block your access. To do this, here are the steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been accomplished, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Volkswagen Crafter 2. You may perhaps need to take off the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take off the bulb socket from its location. To do this, pull carefully on the socket and not on the wires (you risk damaging them), at last now that the socket is out, you can replace your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the assembly, reconnect your battery and perform a check test before taking to the road.
- By removing the crosshair grill and the headlight:
- Second solution, you can remove the headlight of your Volkswagen Crafter 2 if the access through the engine block seems too challenging. To do this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these steps are achieved you will simply have to follow the same methodology as on the previous part to replace the front daytime running light bulb of your Volkswagen Crafter 2
.
How to replace the rear parking light bulb on your Volkswagen Crafter 2
To finish , if you wish to change the rear parking light bulb of your Volkswagen Crafter 2 the approach is much simpler, here are the different guidelines to follow to allow you to change this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are working correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Volkswagen Crafter 2, please browse our dedicated document to discover how to do it.
If you need more tutorials on the Volkswagen Crafter 2, go to our Volkswagen Crafter 2 category.
